Leaky ducts waste energy and make rooms uncomfortable. We find the problems and fix them right.
That room that's always too hot? That energy bill that doesn't make sense? There's a decent chance your ductwork is the problem—and nobody's looked at it in 30 years.
Click the signs you're experiencing
Transparent, effective, guaranteed results
We get in the attic, crawlspace, or wherever your ducts run and actually look at them.
Real inspection means eyes on the ductwork. Not a camera from the vent—actually getting up there and checking.We look for: disconnected sections, crushed flex duct, failed connections at boots and plenums, deteriorated insulation, improper sizing, and anything else that's robbing you of airflow.We also measure. Airflow at each register tells us if you're getting what you should be getting. Big difference between "duct looks okay" and "duct is actually delivering air."When we're done, you know exactly what's wrong and what it takes to fix it.
We seal leaks, fix connections, and repair damaged sections.
Most duct problems can be fixed without replacing everything.Sealing: Mastic and proper tape on joints and connections. Not the shiny "duct tape" from the hardware store—that stuff fails in attic heat. Real duct sealant that lasts.Repair: Reconnecting disconnected sections, replacing crushed runs, reattaching boots that have pulled away from drywall.Insulation: R-8 insulation minimum for attic ducts. If yours is falling apart or missing, we fix that.We focus on the problems that actually affect your comfort and efficiency. Not upselling you duct cleaning you don't need.
When repair doesn't make sense, we replace with properly sized, properly installed ductwork.
Sometimes the ducts are too far gone. Flex duct from the '80s that's falling apart. Undersized runs that were wrong from day one. Systems that have been "repaired" so many times they're more tape than duct.When replacement is the answer, we do it right:Proper sizing based on load calculations—not "same size as before." Rigid duct where it makes sense, quality flex duct properly supported where it doesn't. Sealed connections, proper insulation, clean runs with no kinks or sharp bends.We pull permits when required and make sure it passes inspection.
We test after the work to prove it made a difference.
We don't just seal things up and call it done. We verify.After repairs or replacement, we measure airflow at the registers again. Compare before and after. Make sure the problem rooms are actually getting air now.We also check static pressure at the equipment. Ductwork that's too restrictive makes your system work harder and die sooner. We make sure we haven't created new problems while fixing old ones.You get a real before-and-after, not just "trust us, it's better."
We get in the attic and look. Not a sales pitch—real assessment.
Airflow testing before and after. We prove the work made a difference.
Sealing, repair, or replacement—whatever actually solves the problem.
We've seen every duct disaster Sacramento has. Nothing surprises us.
We'll find out what's wrong and tell you what it takes to fix it.